DIY - Travel writing in fabric

• Draw the 4 pieces of the writing board (back, 2 mirrored sides, flap) with the attached templates and cut them with the cutter.

• In each sheet of white paper, cut 4 strips of 5 x 29.7cm and spray the Odif 303 Adhesive on their entire surface.

• Position the closed sides on the writing board and glue the straddle strips to the sides. 

• Open and glue the strips inside in opposite directions.
• Cut the excess paper.

Repeat steps 3 and 4 with the flap.

• Open the writing box and draw the contour on the underside of the fabric.
• Cut out about 2 cm from the outside of the line.
• Erase the line.

• Glue the magnets to the places indicated on the pattern (E = outside).
• Coat the outside of the writing board with a medium layer of Odicoat.
• Glue the fabric to the outside of the writing board, smoothing with a cloth to avoid bubbles.

• Stick the magnets in the places indicated on the pattern (I = inside).

• Generously spray the Odif Fabric Booster on the fabric inside the writing box.
• Iron at medium temperature while protecting the sole of the iron.

• Draw the contour of the opener on the fabric and cut to 0.5 cm inside the trace.
• Coat the inside of the writing box with a medium layer of Odicoat.
• Glue the fabric.
• Let dry 24 hours before closing the writing box.

Get your feathers ready, write!