After the fabric version, discover the paper version. With these two DIY tutorials, you will find your happiness to share a souvenir of travel with your loved ones.
Note
Duration : 2h
Difficulty : 2/5
Material
1 x 0.5 cm thick foam board (50 x 70 cm)
1 sheet of dark blue fancy wall paper (50 x 70 cm)
1 sheet of medium blue murier paper (50 x 70 cm)
2 sheets of white paper (A4)
Neodymium magnets
Odif 202 Adhesive
Odif 201 Masking Adhesive
Odif 303 Permanent Adhesive
Strong adhesive for magnets
Scissors
Cutter
Rag
Step 1
Draw the 4 pieces of the writing board (back, 2 mirrored sides, flap) with the attached templates and cut them with the cutter.
Step 2
In each sheet of white paper, cut 4 strips of 5 x 29.7 cm and spray the Odif 303 Adhesive on their entire surface.
Step 3
Position the folded sides on the back of the writing board and glue the straddle strips to the sides.
Step 4
Open and glue the strips inside in opposite directions.
Cut the excess paper.
Step 5
Repeat steps 3 and 4 with the flap.
Stick the magnets in the places indicated on the pattern (E = outside, I= inside).
Step 6
Open the writing box and draw the contour on the back of the wall paper.
Cut out about 2 cm from the outside of the line.
Spray the Odif 202 Adhesive on the entire surface of the cut paper.
Step 7
Glue the paper to the outside of the writing board, smoothing with a cloth to avoid bubbles.
Fold the excess over the inside.
Open the corners by incising before folding.
Step 8
Draw the contour of the opener on the medium blue paper and cut to 0.5 cm inside the trace.
Shake the Odif 201 masking adhesive vigorously and spray the glue over the entire surface.
Step 9
Glue the paper to the inside of the writing box.
Let dry before closing.
You can also customise it ineluctably and externally according to your desires.
Conclusion
Everything is ready!It’s time to take up the pen now!